ElimiShield Hunt Scent Control Elimishield HUNT X10D Scent-Eliminating Textile Treatment – Converts Regular Fabrics Into Scent-Control Garments

Description

 

 

 

ElimiShield® HUNT X10D
Extended Protection in a Scent-Free Concentrate!
ElimiShield® HUNT X10D is a permanent treatment for textiles that prevents the formation of human body odors. When used as directed, X10D bonds to the fibers in textiles to create a chain of atoms that produces an uninhabitable surface for odor-causing compounds. The “shield” is permanent and lasts for up to 50 washings. It also protects garments from souring during storage.

DIRECTIONS: (10 ounces of X10D treats 10 pounds of laundry in 10 minutes)
1. Wear safety glasses and rubber gloves when handling this product.
2. Add 3 gallons of 110°F (minimum) water to a bucket or other, similar container. (Maximum Water Temp: 150°F)
3. Weigh garments to determine the proper amount to add to the water.
4. Shake bottle well and add 1 ounce of X10D for every pound of garments to the water.
5. Stir mixture well.
6. Add garments and let soak for a minimum of 10 minutes.
7. Remove each garment separately and wring excess water back into the container.
8. Hang dry until damp before placing into a clothes dryer. Do not wash until garments have dried completely.
9. Discard excess mixture. It is safe to pour down any drain.
Notes: When treating new garments, it is normal for the water to darken from excessive dye. Treat only textiles capable of absorbing water. Not recommended for rubber, rain gear, waterproofed materials, or hard parts or surfaces. For best results, treat garments before every hunting season to ensure complete protection.
KEEP OUT OF REACH OF CHILDREN AND PETS. WARNING: EYE IRRITANT. SAFETY GLASSES RECOMMENDED WHEN HANDLING THIS PRODUCT. DO NOT INGEST. MILD SKIN IRRITANT. PROTECTIVE GLOVES ARE RECOMMENDED.
INGREDIENTS:
-Distilled Water
-Octadecyl Ammonium Chloride Quaternary, Methyl Alcohol
-Isodecyl Alcohol, Propoxylated Ethoxylated
-Methylchloroisothiazolinone